SPEEDWOOFER 10S WIRELESS TRANSMITTER
Make your Speedwoofer wireless with RSL’s AT wireless transmitter. Good for up to 50 feet. Going wireless makes installation and finding the right location, a breeze. The signal is not impeded by furniture and is non-directional. So a clear line of sight is not necessary. Best of all, going wireless does not sacrifice sound quality.
* Keep in mind that you can use one transmitter to operate up to two Speedwoofers (four with AT-3) simply by pairing them to a single transmitter. All Subwoofers must be compatible with the same transmitter model.
Discontinued
The AT Transmitter Series 1 – 3 is now available on our Closeout Store. Browse Outlet Products.
Transmitter | Serial Number (S/N) | Info / Order |
---|---|---|
AT-1 (2016 models) | No Serial Number or 1701 – 1719xxxx | Check Availability |
AT-2 (2017 – 2020) | 1720xxxx and above | Check Availability |
AT-3 (2021) | 10-21xxxx and above | Check Availability |
AT-4 (2022+) | 10S2x201021xxxx and above (MKII Only) | Buy Now |
WIRELESS TRANSMITTER
FOR SPEEDWOOFER 10S
New Features on the AT-3
- Extended range (up to 50ft)
- Reduced latency (less than 20mS)
- Connect to up to 4 Speedwoofers simultaneously
- Enhanced AFCS (automatic adaptive frequency channel selection)
NOTE: NEW PAIRING METHOD ON AT-3
Download AT-3 Pairing Instructions
The RSL AT-3 wireless adaptor includes the following:
- For 2021+ Speedwoofer models
- The AT-3 wireless transmitter
- 1 USB power adaptor (for use with wall outlet)
- 1 USB power cord
- 1 mini plug to mono RCA (for use with home theater receivers)
- 1 mini plug to stereo RCA (for use with stereo amps/pre-amps)
The RSL AT-2 wireless adaptor includes the following:
- For 2017 – 2020 Speedwoofer models
- The AT-2 wireless transmitter
- 1 USB power adaptor (for use with wall outlet)
- 1 USB power cord
- 1 mini plug to mono RCA (for use with home theater receivers)
- 1 mini plug to stereo RCA (for use with stereo amps/pre-amps)
The RSL AT-1 wireless adaptor includes the following:
- For 2016 Speedwoofer models
- The AT-1 wireless transmitter
- 1 USB power adaptor (for use with wall outlet)
- 1 USB power cord
- 1 mini plug to mono RCA (for use with home theater receivers)
- 1 mini plug to stereo RCA (for use with stereo amps/pre-amps)
The wireless transmitter works great. I originally had my Speedwoofer 10s wired to my receiver, but the subwoofer looked out of place with the layout of my room. I picked up the wireless transmitter to move the subwoofer to the back of my room, away from the receiver. I was concerned with whether I'd be able to notice any lag in sound because of the wireless vs hardwired connection, and I'm very pleasantly surprised to report that I notice absolutely none. I've tried different types of inputs, and they all sound 100% spot on.