800.905.5485
M - F 10am - 5pm (Pacific)

Speedwoofer 10S MKII

Features:

  • 400 watts RMS / 1020 watts peak
  • Cast-frame 10” woofer w/ improved thermal capacity
  • LFE mode offers deeper extension (22Hz!)
  • Music mode matches original 10S w/ improved dynamics
  • Rear-vented Compression Guide™ tuning
  • Wireless ready. Option to add during checkout*
  • ALL SPEEDWOOFERS INCLUDE A COLOR-MATCHED GRILLE

     

Terms & Conditions:

  • Free shipping within the 48 states!
  • 30-day in-home trial period
  • A 3.5% cancellation fee will apply to orders cancelled prior to shipping.
  • $50 flat-rate return fee per Speedwoofer from the 48 states.
NOTE FROM RSL TEAM

Note from RSL Team

x

Help us to reduce or eliminate the return fee!

Our return fee is in place for the sole purpose of protecting the Speedwoofers’ industry-leading performance and pricing. The cost of one-way shipping for a Speedwoofer ranges from $40 to $150. Double that and add a substantial cost for repackaging and recertification, and it becomes obvious why returns have such an impact. This holds true for ALL consumer-direct products. So please keep this in mind wherever you shop, and support us in the fight to eliminate the Speedwoofer return fee.

The two leading causes of Speedwoofer returns continue to be simple over-ordering and spatial constraints. As such, we would like to ask you to kindly consider the following before ordering:

  • Measure twice, order once! Please measure your intended subwoofer locations to ensure the Speedwoofer will fit. Then measure again!
  • Check with your family members! Make sure the Speedwoofer’s aesthetics are acceptable for your home.
  • Order LESS! That might sound strange, but if you aren’t sure how many Speedwoofers you’ll need, start with just one. We know that the affordable price makes multiples even more compelling. However, we would rather build your system to where it needs to be, than have you pay return fees later.
  • Ask for guidance! We are always happy to answer questions and make recommendations. No question is too big or small.

We’d love to see the return fees disappear. Together, we can make it happen!

Thank you and best regards,

The RSL Team

Color: Black (Matte)
$449each
Condition
Free Shipping within the Continental US
* TAXES (GST) INCLUDED *
If you’re not thrilled with an RSL product within 30 days, return it hassle-free. Just contact us and we will email a return label with instructions. A return fee will apply to each Speedwoofer, wireless device, and amplifier / AV receiver included. (For International Returns are different, call us.) International returns are to be arranged and paid by the customer. RSL does not cover international return shipping, or shipping insurance.
All products ship for free to the contiguous 48 States. This includes all Speedwoofers, System Packages, A/V Receivers, Individual Speakers, and Accessories!
We’re ready to answer your questions, provide support, and even help you plan your home theater. Just give us a call at 800-905-5485 or email us at sales@rslspeakers.com.
Our average turnaround time is one business day. Orders received before 11AM Monday – Friday often ship same day!
A $50 flat-rate return fee applies per Speedwoofer 10E or 10S MKII returned from the 48 states. Returning a defective item under warranty for replacement does not carry a return fee, as the return label will be supplied by RSL (U.S. Only)
All Speedwoofer 10E and 10S MKIIs include a 2 year amplifier warranty, and a 5-year warranty on the woofer and enclosure. If something isn't performing like new throughout the warranty period, please don't hesitate to email us for assistance!
We offer highly discounted shipping rates to virtually anywhere outside of the contiguous US via premium air-freight shipping.

Speedwoofer 10S MKII

Overview

The Speedwoofer 10S MKII takes the multi-award-winning and revolutionary performance of the original to the next level.  A brand new RSL XDR™ series (extended dynamic range) proprietary DSP amplifier design, delivers even more peak and continuous power than ever before – 400 watts RMS with 1020 watts peak. The XDR™ amplifier now offers selectable dual mode DSP for a more optimized movie and music experience. Select movie mode (LFE) to use the MKII’s extra power for deeper bass extension and higher output. Music mode sets the performance to match the original 10S performance but with more power and greater dynamics. A new rear-vented Compression Guide™ tuning achieves the same class leading performance but with reduced air restriction and port noise.

Customer Reviews

Based on 115 reviews
97%
(111)
3%
(4)
0%
(0)
0%
(0)
0%
(0)
S
SOUPORSOUNDWITCH
Bass with the feels.

Got the MrkII with the rest of the 5.1 system. Absolutely amazing all around.

J
Joel C.
Wonderful upgrade for my home theater

My previous (non RSL) sub had a plate amp failure. I have a dedicated but humble theater and neighbors, so a sub that had both great extension and response at lower SPL was my target. RSL delivered on both accounts and out performed my old sub. Highly recommended!

M
Matt M.
Deep, strong base, quick shipment

Deep base - we are well down in the 20Hz region - judging from experience without measurements. It's also way strong enough to handle a room with 120m3 volume (no idea what that is in cubic feet)

P
P A.
10s Mk2....sounds wonderful!

I was looking for a sub to compliment an existing ported sub in a dual sub set up. I was looking at sealed subs as I wanted a more articulate and "musical" tone. Did not want another ported sub...so I thought... Then I started reading/watching reviews of the 10s Mk2. It seemed almost too good to be true, but with a satisfaction guarantee, I decided to take a chance. So happy I did....the 10s sounds fantastic. I won't be returning this! I am impressed!

D
D.P.
Well Engineered Sound

Low frequencies and infrasonics from this speaker really shine within my mid-range home theater / listening station. I think this the top of the line for typical home use. It’s definitely a lot smoother and well balanced than other sub $500 mass market subs it competes against.

SPECIFICATIONS

Speedwoofer 10S MKII
  • Frequency Response:
    • MKII/LFE mode (anechoic): 22-200 Hz ± 3db
    • MKII/LFE mode (+ room gain): ~18-200 Hz ± 3db (varies with room size)
  • Woofer:
    • 10” 400+ watt rated woofer
    • 4 ohm nominal Impedance
    • Die-cast aluminum frame
    • High-Excursion FEA optimized design motor structure
      • 1008 low-carbon steel motor parts (T-yoke and field plate)
      • Premium grade dual-stacked ceramic magnets
      • Ultra-high Temp (200° C), Multi-layer Copper Voice Coil
    • High yield fatigue-resistant Nomex™ spider
    • Kevlar™ reinforced paper cone with full anodized aluminum dust cap
    • High durability NBR surround
    • High duty cycle flexible tinsel lead wire with strain relief feature
  • Enclosure:
    • Rear-vented Compression Guide™ tuning
    • Integrated cross-bracing reinforcement
    • ¾” thick MDF woofer panels
    • Laminated 1” front woofer baffle
    • Removable cloth grille
  • XDR Series Amplifier:
    • 400 watts RMS < 1% THD
    • 1020 watts peak
    • Selectable dual-mode DSP – LFE/Music
    • Integrated double-precision 56-bit, 50 MIPS DSP processor
    • Intelligent class D topology, >85% Efficiency
    • Signal to noise ratio: >85dB
    • Auto-ON Threshold: 3mV
    • Auto-OFF: 20 minutes (no signal)
    • Stand-by power consumption: ~0.5 watts
    • Power Input: Selectable 110/230VAC 50-60Hz switch
    • Low EMI design, CE & C-Tick compliant
    • Line level RCA inputs and RCA pass-through signal outputs
    • Speaker level binding post inputs
    • Chassis ground screw
    • Wireless Pairing Button: Integrated 2.4GHz wireless receiver compatible with RSL AT-3 & AT-4 Transmitters
  • Crossover Frequency: 40-200 Hz variable
  • Crossover Slope: 24 dB/oct
  • Phase Control: 0 to 180 continuously variable
  • Power Input: 115V, 60Hz, 230V, 50/60Hz AC
  • Feet: Includes 4 rubber feet
  • Dimensions with Feet: H: 15 1/2” W: 15” D: 15 3/4”
  • Weight: 40.6 lbs
  • Shipping Dimensions: H: 20” W: 20” D:20”
  • Shipped Weight: 48.6 lbs
  • Fuse: 115V (T5.0AL/250V) – 230V (T2.5.0AL/250V)