800.905.5485
M - F 10am - 5pm (Pacific)

NOW IN WHITE!

the new!
Speedwoofer
12s
16 Hz-200 Hz ± 3db

*EVERY SPEEDWOOFER COMES STANDARD WITH ITS BLACK OR WHITE GRILLE COLOR*

Experience everything, sacrifice nothing
The 12S is born from passion, bred with great lineage, engineered to perform, and guaranteed to thrill. After several years in development, the Speedwoofer 12S represents the next tier and evolution of performance to complement the award-winning and undisputed market leader, the Speedwoofer 10S model.
Experience everything, sacrifice nothing
12S white in living room
The 12S is born from passion, bred with great lineage, engineered to perform, and guaranteed to thrill. After several years in development, the Speedwoofer 12S represents the next tier and evolution of performance to complement the award-winning and undisputed market leader, the Speedwoofer 10S model.
12S black in living room
Grab your convenient 12S remote control for instant adjustments on the fly. No need to disturb the movie or fumble through a phone app.
12S remote control
a subwoofer for any room size
award winning performance and value

Customer Reviews

Based on 76 reviews
97%
(74)
3%
(2)
0%
(0)
0%
(0)
0%
(0)
J
Jason L.
Everything I was hoping for !

I bought the RSL 12S because I always wanted a true subwoofer at a fair price, and oh boy, did RSL deliver. Thank you to Audioholics and the many other stellar online / YT reviews. The cabinet is big but RSL warns everyone before purchase to Measure Twice and Cut Once, as one says, and get buy-in from other family members, but it fits the space once occupied by my old Velodyne DLS-5000R (amp developed a hum and was too expensive to fix) perfectly. I don't miss it one bit though. I am amazed by my new subwoofer, and it's so much better in every way than what I've owned before.

And it fits perfectly on top of my "SubDude-HT Subwoofer Isolation Pad" like it was made for it, so needed in my space because of the wood floor over a crawlspace. The whole house would shake and rattle otherwise.

I have the 12S set to Reference and at 5/10 bars. I ran YPAO on my Yamaha RX-3900 receiver and now the 12S is matched wonderfully in my 5.1 system with my old Polks (L/R: RT1000p, C: CS400 Rears: FX500).

Thanks again RSL for answering all my questions before purchase and for braving the terrible Dec 2024 / Jan 2025 LA fires.

A
Anonymous
awesome sub woofer

This is my first expensive sub woofer. Had a dayton 12 inch sub and this one is a huge leap. This sub truly disappears from the sound stage ( no unwanted boom sounds). After experiencing movies with this sub you cant watch them on any other sub!

D
Daniel H.
12S upgrade

Upgraded from dual 10S mkII to dual 12S. My 10S were great. But the 12S are monsters. They really fill in the room. It’s not that they’re a lot louder. It’s just a better balanced sound throughout the whole volume range. If you crank it up they really rumble the room! Really happy with these speakers.

R
Ray F.
Average Room - Great Bass

Until about a week before I made my purchase, I knew nothing about RSL and their speakers. After a few online reviews, I decided to give them a shot. The 12s is a great sounding sub!

P
Paul R.
Let there be Bass!

I love my 2 12S Speedwoofers even though my neighbors don't.
Thank You Joe and the RSL Team

Meticulously crafted for excellence
500w
rms
1550w
peak
"...A LOW FREQUENCY MONSTER"
TECHNICALLY SPEAKING...
REFERENCE: Minimal EQ processing, “natural” response for ideal transient performance
MOVIE: Enhanced output between 25-35Hz to augment low frequency content at low levels
MUSIC: Shelved response for extension, but with good upper bass impact
BOUNDARY: “Neighbor friendly”…Reduced lower frequencies to limit rumble through walls
SPECIFICATIONS
  • Frequency Response:
    • Reference Mode (anechoic): 16 Hz-200 Hz ± 3db (SEE GRAPH FOR VARIOUS DSP RESPONSES)
  • Woofer:
    • 12” 500+ watt rated woofer
    • 4 ohm nominal Impedance
    • Proprietary RSL Die-cast aluminum frame with dual spider integration
    • Klippel optimized linear magnet motor and matched suspension
    • High-Excursion FEA optimized design motor structure
      • Integral VC Heat Sink/Inductance Control Sleeve
      • 1008 low-carbon steel motor parts (T-yoke and field plate)
      • Premium grade dual-stacked ceramic magnets
      • Ultra-high Temp (>200° C), Multi-layer Copper Voice Coil
    • Dual-mirrored, High yield fatigue-resistant Nomex™ spiders
    • Integrated Dual Spider spacer clamp ring
    • Kevlar™ reinforced paper cone with full anodized aluminum dust cap
    • High durability NBR surround
    • High duty cycle periodically stitched flexible tinsel lead wire with strain relief features
  • Enclosure:
    • Scratch and fingerprint resistant textured matte finish
    • Front multi-segment LED display/indicator (Volume, Mute, & DSP MODE)
      • Display sleeps after ~10 sec. of inactivity
    • Rear-vented Compression Guide™ tuning with turbulent free slot port
    • Internal structural reinforcement (Side to side, front to back, and top cross-bracing)
    • ¾” thick MDF panels with dado reinforced joints plus corner bracing
    • Laminated 1” front woofer baffle
    • Internally optimized damping
    • Removable cloth grille
  • XDR Series Amplifier:
    • IR Remote Control (Power Toggle, Volume +-, Mute, DSP Mode direct select (Reference, Music, Movies, Boundary)
    • External 3.5mm IR input for wiring external IR sensor (eye)
    • 500 watts RMS < 1% THD
    • 1550 watts peak
    • Patent Pending HSS™ Heat Sink/Shield Technology for greater thermal efficiency and capacity
    • DSP Modes – Reference, Music, Movies, Boundary (Rear LED indicator matches front display)
      • Reference – Minimal EQ processing, “natural” response for ideal transient performance
      • Music – Shelved response for extension, but with good upper bass impact
      • Movies – Enhanced output between 25-35Hz to augment low frequency content at low levels
      • Boundary – “Neighbor friendly”…Reduced lower frequencies to limit rumble through walls
    • Integrated double-precision 56-bit, 50 MIPS DSP processor
    • Intelligent class D topology, >85% Efficiency
    • Signal to noise ratio: >85dB
    • Auto-ON Threshold: 3mV
    • Auto-OFF: ~20 minutes (no signal)
    • Stand-by power consumption: ~1 watt
    • Power Input: Selectable 110/230VAC 50-60Hz switch
    • Low EMI design, CE & C-Tick compliant
    • Gold-plated RCA Line level inputs and RCA High-pass signal outputs (high-pass is adjustable and can be bypassed)
    • Speaker level inputs (Gold-plated, 5-way binding posts)
    • Chassis ground screw
    • USB Power port, easily connect external AR-4 2.4GHz wireless receiver
  • Low Pass Crossover Frequency: 30-250 Hz variable (with integrated bypass switch)
  • Low Pass Crossover Slope: 24 db/oct.
  • High Pass RCA Output Crossover Frequency: 30-250 Hz variable (with integrated bypass switch)
  • High Pass RCA Output Crossover Slope: 24 db/oct.
  • Phase Control: 0 to 180 continuously variable
  • Power Input: 115V, 60Hz, 230V, 50/60Hz AC
  • Feet: Includes 4 rubber feet
  • Dimensions with Feet: H: 22 1/4” W: 18 7/8” D: 22 1/8”
  • Weight: 82 lbs.
  • Shipping Dimensions: H: 29” W: 25” D: 29”
  • Shipped Weight: ~106 lbs.
  • Fuse: 115V (T6.3AL/250V) – 230V (T3.15AL/250V)