800.905.5485
M - F 10am - 5pm (Pacific)

THE NEW!

SPEEDWOOFER

10E

300W RMS / 800W PEAK

ONLY $299 SHIPPED

THE SUBWOOFER FOR EVERYONE!

The Speedwoofer 10E completely revolutionizes our perception of affordable, high-performance subwoofers. Boasting an impressive 300 Watts of True RMS power, and an astonishing peak output power of over 800 Watts, this subwoofer delivers unparalleled dynamic deep bass that will leave you in awe. Its exceptional ability to maintain accurate musical precision, a trademark of all Speedwoofers, sets it apart from the competition. Thanks to RSL's Compression Guide technology, the enclosure of the 10E ensures remarkable rigidity, effectively eliminating unwanted resonances, and granting you the privilege of immersing yourself in pure music, free from any distractions caused by the cabinet.

THE SUBWOOFER FOR EVERYWHERE

DIMENSIONS

H: 15.5” x W: 15” x D:15 1/4”

With Grille & Rubber feet

PRECISION ENGINEERED

SUBWOOFER PLACEMENT MADE EASY

SPECIFICATIONS

  • Frequency Response:
    • (anechoic): 26-200 Hz ± 3db
    • (+ room gain): ~22 Hz-200 Hz ± 3db (varies with room size)
  • Woofer:
    • 10” 300+ watt rated woofer
    • 4 ohm nominal Impedance
    • Heavy Gauge Cold-Rolled Stamped-Steel frame
    • High-Excursion FEA optimized design motor structure
      • 1008 low-carbon steel motor parts (T-yoke and field plate)
      • High-grade dual-stacked ceramic magnets
      • High Temp (180° C), Multi-layer Copper Voice Coil
    • High yield fatigue-resistant Nomex™ spider
    • Kevlar™ reinforced paper cone with full anodized aluminum dust cap
    • High durability NBR surround
    • High duty cycle flexible tinsel lead wire with strain relief feature
  • Enclosure:
    • Rear-vented Compression Guide™ tuning
    • Integrated cross-bracing reinforcement
    • ¾” thick MDF woofer panels
    • Laminated 1” front woofer baffle
    • Removable cloth grille with Metal RSL Logo
  • XDR Series Amplifier:
    • 300 watts RMS < 1% THD
    • 800 watts peak
    • Intelligent class D topology, >85% Efficiency
    • Signal to noise ratio: >82dB
    • Auto-ON Threshold: 10mV
    • Auto-OFF: ~30 minutes (no signal)
    • Stand-by power consumption: ~0.5 watts
    • Power Input: Selectable 110/230VAC 50-60Hz switch
    • Low EMI design, CE & C-Tick compliant
    • Line level RCA inputs
    • Chassis ground screw
  • Crossover Frequency: 30-200 Hz variable
  • Crossover Slope: 12 dB/oct
  • Phase Control: 0 to 180 continuously variable
  • Power Input: 115V, 60Hz, 230V, 50/60Hz AC
  • Feet: Includes 4 semi-rigid rubber feet (ideal for hard and carpeted surfaces)
  • Dimensions with Feet (incl. grille): H: 15 1/2” W: 15” D: 15 3/4”
  • Weight: 38 lbs
  • Shipping Dimensions: H: 20” W: 20” D:20”
  • Shipped Weight: 45 lbs
  • Fuse: 115V (T5.0AL/250V) – 230V (T2.5.0AL/250V)

A SUBWOOFER THAT LEADS BY EXAMPLE

Customer Reviews

Based on 248 reviews
97%
(241)
2%
(5)
1%
(2)
0%
(0)
0%
(0)
J
JS P.
Speedwoofer 10E

Replaced my 20 year old shorted PSB 10" with this unit. Sounds clean and very efficient at low power. Looks well built and reasonably priced.
Perfect specs too!

L
Louis M.
Still the best

I was a fan back in the 80's and glad RSL is back! The sound is better than ever, I can't imagine buying a better speaker system than RSL.

M
Ming Y.
Nice

Just a noob. Didnt want anything overpowering. Something to hit the lower frequencies in the media/games I listen to and play. Easy to hookup with my LS50 and vanatoo speakers

I used a female rca y splitter to 2 male rca jacks that seemed to work well when the speakers start up, it'll trigger the sub to turn on.

Really stratified with price and delivery time.

P
Phil D.
Great value

The 10E goes lower and louder than my old Paradigm 12" subwoofer. I am very satisfied for both home theater and music.

M
Martin B.
Great sub at a great price

Was very impressed with this sub l. It arrived quickly, was well packed. Quality build and came right to life. Adjusted well with my system and hits low and tight for music. Had some trouble with it waking up until I used an rca splitter- and since adding one it’s been working just fine!